Loading ...
Loading ...
Loading ...
8
INSTALLING YOUR WINE COOLER
INSTALLATION
INSTALLATION
IMPORTANT INSTALLATION NOTES:
• Before installing your wine cooler, allow to stand
upright for 3 hours.
• Once the unit is installed and turned on, allow 24 hours
before use for the temperature to stabilize.
• Clean the interior of the unit with warm water and a
soft cloth, and make sure it is dry.
• Place only on a level surface that will support the
full weight once Wine Cooler is completely full. You
can ensure the unit is level by placing a small ball on
top and checking to make sure it does not roll in any
direction.
• Position in a dry, well-ventilated space with
temperatures between 41° - 90° F (5° - 32° C).
• Ensure that the ventilation panel on the bottom front of
your wine cooler remains unobstructed.
• Do not use without feet: the unit requires 2" of ground
clearance.
• If you are discarding an old unit, remove its door and
leave shelves in place to avoid an entrapment hazard.
INSTALLING THE DOOR HANDLE:
• The unit has been shipped with the door handle
J
securely stored inside, attached to the shelves.
• The default door-opening option of your wine cooler
will have it swinging open from left to right. If you need
to reverse this door swing, please follow the separately
listed instructions on the next page.
• Gently pull the door gasket back from
the screw holes where you will attach
the handle.
• Use the two included screws
C
and
washers
D
in order to fasten the door
handle to the frame of the door.
Loading ...
Loading ...
Loading ...