Loading ...
Loading ...
Loading ...
48 MAINTENANCE
2
Pull the water lter downward and pull out. Make
sure to rotate the lter down completely before
pulling it out of the manifold hole.
3
Replace with a new water lter.
Take the new water lter out of its packing and
remove the protective cover from the o-rings.
With the water lter tabs in the horizontal position,
push the new water lter into the manifold hole
until it stops.
4
Rotate the water lter up into position and close
the cover. The cover will click when closed
correctly.
5
After the water lter is replaced, dispense 2.5
gallons of water (ush for approximately 5
minutes) to remove trapped air and contaminants
from the system.
NOTE
• Do not dispense the entire 2.5 gallon amount
continuously. Press and release the dispenser pad
for cycles of 30 seconds ON and 60 seconds OFF.
• Keep the water lter bypass plug. You MUST use
the water lter bypass plug when a replacement
water lter cartridge is not available.
6
After changing the lter, press and hold the
Water Filter button for three seconds to reset the
indicator light.
CAUTION
• DO NOT operate the refrigerator without a water
lter or water lter bypass plug installed.
NOTE
To purchase a replacement water lter:
• Visit your local dealer or distributor
• Search using "water lter" on lg.com
• Use replacement cartridge: ADQ36006101
For further assistance, call:
1-800-243-0000 (USA)
1-888-542-2623 (Canada)
Loading ...
Loading ...
Loading ...