Loading ...
Loading ...
Loading ...
Securing the TV to a table
(Depending on model)
Fix the TV to a table to prevent from tilting
forward, damage, and potential injury.
1
Connect the Desk-mount Cables to the Stand
Base using the Bracket Screws.
2
Fix the Desk-mount Cables to a table using the
Desk-mount Screws.
3
Once the TV is fixed, move the table close to
the wall. Children may go in, causing injuries.
WARNING
To prevent TV from falling over, the TV
should be securely attached to the floor/wall
per installation instructions. Tipping, shaking,
or rocking the TV may cause injury.
Securing the TV to a wall (optional)
1
Insert and tighten the eye-bolts, or TV brackets
and bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts
position, remove the bolts first.
2
Mount the wall brackets with the bolts to the
wall.
Match the location of the wall bracket and the
eye-bolts on the rear of the TV.
3
Connect the eye-bolts and wall brackets tightly
with a sturdy rope.
Make sure to keep the rope horizontal with the
flat surface.
CAUTION
Make sure that children do not climb on or
hang on the TV.
NOTE
Use a platform or cabinet that is strong and
large enough to support the TV securely.
Brackets, bolts and ropes are optional. You
can obtain additional accessories from your
local dealer.
Tidying cables
1
Gather and bind the cables with the cable
holder.
Cable holder
2
Fix the cable management clip firmly to the TV.
Cable management clip
Do not move the TV by holding the cable
holder and cable management holder, as
the cable holders may break, and injuries
and damage to the TV may occur.
CAUTION
ENGLISH
19
ASSEMBLING AND PREPARING
Loading ...
Loading ...
Loading ...