Loading ...
Loading ...
Loading ...
![](https://files.manualsfile.com/uhd-digisuper-27/bg2c.png)
E6
1 HOW TO MOUNT
E7
1-3 Mounting the
Accessories for Semi-
servo Operation
The zoom servo demand and the exible focus control unit
are mounted and connected as shown in the gure below.
When mounting the various demands, refer to the operation
manual for the respective demand.
① Flexible module
② Flexible focus control unit
③ Servo module
④ Zoom servo demand
⑤ Flexible cable
⑥ Demand cable
1-4 Mounting the
Accessories for Manual
Control System
Mount and connect the exible zoom and focus control units
as shown in the gure.
When mounting the various demands, refer to the operation
manual for the respective demand.
① Flexible module
② Flexible zoom control unit
③ Flexible focus control unit
④ Flexible cable
⑤ Switch box unit
Mounting the exible module
It is necessary to mount the exible module to the zoom and
focus couplings located in the bottom compartment of the
lens.
* (NOTE)
The same exible module is used for both zoom and focus
couplings. So, it can be mounted on either the zoom or focus
coupling.
1
Before mounting the module to the lens, turn the lock
screw of the module counterclockwise until the lock
axis comes out to its a half way of length.
2
Press the module in the direction of arrow “A”, so
that the key pins on the lens are inserted in the key
grooves of the module.
3
Mate the coupling A of the module with the coupling
B of the lens. And then, fully push the module in the
direction of arrow “B” until it stops.
Loading ...
Loading ...
Loading ...