Loading ...
Loading ...
Loading ...
As the appliance stores the saved settings, there is
no need to configure it before every cycle.
ADJUSTING THE WATER SOFTENER
Make sure the appliance is in user mode.
1. Press .
The indicators and are off. The
indicator still flashes.
The indicator starts flashing. The number of
flashes indicates the current water softener setting
(e.g. 5 flashes + pause + 5 flashes... = level 5).
2. Press to change the setting. Each
pressing of the button increases the
level number by one. After reaching level 10,
the count starts from level 1.
3. Press on/off to confirm and save the setting.
THE WATER HARDNESS TABLE
German degrees
(°dH)
French degrees
(°fH)
mmol/l Clarke degrees
Water softener
level
47 -50 84 - 90 8.4 - 9.0 58 - 63 10
43 - 46 76 - 83 7.6 - 8.3 53 - 57 9
37 - 42 65 - 75 6.5 - 7.5 46 - 52 8
29 - 36 51 - 64 5.1 - 6.4 36 - 45 7
23 - 28 40 - 50 4.0 - 5.0 28 - 35 6
19 - 22 33 - 39 3.3 - 3.9 23 - 27
5
1)
15 - 18 26 - 32 2.6 - 3.2 18 - 22 4
11 - 14 19 - 25 1.9 - 2.5 13 - 17 3
4 - 10 7 - 18 0.7 - 1.8 5 - 12 2
<4 <7 <0.7 < 5
1
2)
1) Factory setting
2) Do not use salt at this level.
ACTIVATING THE ACOUSTIC SIGNAL AT THE
END OF A PROGRAMME
Make sure the appliance is in user mode.
1. Press .
The indicators: and are off. The
indicator
still flashes.
The indicator shows the current setting. If on
= the acoustic signal is active. If off = the acoustic
signal is disabled.
2. Press to change the setting.
3. Press on/off to confirm and save the setting.
HOW TO DEACTIVATE AIRDRY
AirDry improves the drying results with less energy
consumption.
While the drying phase operates, the
device opens the appliance door. The
door is then kept ajar.
By default, AirDry is activated with all programmes
excluding (if applicable), but it is possible to
deactivate it.
Make sure the appliance is in user mode.
7
Loading ...
Loading ...
Loading ...