Loading ...
Loading ...
Loading ...
7
ELECTRONIC OVEN CONTROL
Display
When power is supplied to the range or after a power
interruption, the last clock time before power was interrupted will
flash.
“BAKE” or “LOCK” may flash rapidly in the display to alert you if
there is an error or problem. Press CANCEL and reset clock if
needed.
When the oven is in use, the display shows the temperature and
oven setting.
When the oven is not in use, the display shows the time of day.
When using the TIMER, for settings of 1 to 59 minutes, the
display will count down in minutes. For settings of 1 hour or
more, the display will count down hours and minutes.
Cancel
The CANCEL button stops any function except the Clock, Timer
and Control Lock. When you press the CANCEL button, the
display will show the time of day, or the time remaining if the
TIMER is being used.
Clock
The clock can be set to display time in a 12-hour or 24-hour
format. The clock is set at the factory for the 12-hour format.
To recall the time of day when another time function is showing,
press the Clock pad.
Clock time cannot be changed when the oven has been
programmed for Delay Cook, Clean or Cook & Hold.
To Change the Clock to 24-hour Format:
1. Press and hold CANCEL and DELAY for 3 seconds.
2. Press the “up” or “down” arrow pad to select 24 hour.
To Set:
1. Press CLOCK. The colon will flash in the display.
2. Press the “up” or “down” arrow pads to set the time of day.
3. Press CLOCK or wait 4 seconds. The colon stops flashing.
To Cancel the Clock Display:
If you do not want the time of day to display:
Press and hold CANCEL and CLOCK for 3 seconds. the time of
day will disappear from the display.
When the clock display is canceled, press CLOCK to briefly
display the time of day.
To Restore the Clock Display:
Press and hold CANCEL and CLOCK for 3 seconds. The time of
day will reappear in the display.
Timer
The Timer can be set in hours or minutes up to 99 hours and
59 minutes, and counts down the set time.
The Timer can be used independently of any other oven function.
It can also be set while another oven function is operating.
NOTE: The Timer does not start or stop the oven.
To Set:
1. Press TIMER.
“0:00” will appear in the display. The colon will flash.
2. Press the “up” or “down” arrow pads to set the length of
time.
3. Press TIMER again or wait 4 seconds. Time will begin
counting down.
When the set time ends, 1 long beep will sound.
To Cancel:
1. Press and hold TIMER for 3 seconds
OR
2. Press TIMER and set time to 0:00.
A. Bake
B. Clock/timer display
C. More (+)/less (-) buttons
D. Timer
E. Cancel
F. Keep warm
G. Clock
H. Delay (on self-clean models)
I. Clean (on self-clean models)
J. Cook & hold
K. Broil
A
B
C
D
E
F
G
H
I
JK
Loading ...
Loading ...
Loading ...