Loading ...
Loading ...
Loading ...
Flex Zone en
13
|Flex Zone
Fl e x Zone
You can use each flex zone as a single hotplate or as
two independent hotplates, as required.
It consists of four inductors that work independently of
each other. If using the flexible cooking zone, only the
area that is covered by cookware is activated.
Advice on using cookware
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
As two independent hotplates
The flexible cooking zone is used like two independent
hotplates.
Activating
See section ~ "Operating the appliance"
As a single hotplate
Using the entire cooking zone by connecting both
hotplates.
Connecting the two hotplates
1. Set the cookware on the hotplate and use one of the
hotplate controls to select the required heat setting
for the flexible cooking zone.
The heat setting lights up in the hotplate's display
until you have selected it.
2. Touch the è symbol. The display lights up.
The flexible cooking zone is activated.
Changing the power level
Use the same control as above to change the power
level.
Adding new cookware
Set down the cookware and touch the è symbol twice.
The new cookware is detected and the previously
selected heat setting remains the same.
Notes
■ If the cookware on the active hotplate is moved or
lifted from it, the hotplate begins an automatic
search and the heat setting that was previously
selected is retained.
■ If you turn a hotplate control that was not previously
used to select the heat setting, the flexible cooking
zone is deactivated. In this case, both hotplates
continue to function independently of one another,
with each hotplate operating at the previously
selected heat setting.
Disconnecting the two hotplates
Touch the è symbol. The flexible cooking zone is
deactivated. The cooking zone functions like two
independent hotplates.
Note: If you switch the hob off and then subsequently
switch it on again, the flexible cooking zone is
converted back to two independent hotplates.
As a single hotplate
Diameter smaller than or equal to 13 cm
Place the cookware on one of the four posi-
tions that can be seen in the illustration.
Diameter greater than 13 cm
Place the cookware on one of the three
positions that can be seen in the illustration.
If the cookware takes up more than one
hotplate, place it starting on the upper or
lower edge of the flexible cooking zone.
As two independent hotplates
The front and rear hotplates each have two induc-
tors and can be used independently of each other.
Select the required heat setting for each of the
hotplates. Use only one item of cookware on each
hotplate.
Recommendations
If the hob has more than one flexible
cooking zone, place the cookware on
top so that it covers only one of the flex-
ible cooking zones.
Otherwise, the hotplates will not be
activated as intended and the cooking
result will not be satisfactory.
Loading ...
Loading ...
Loading ...