Smeg PLA4513X User Manual

Loading ...

User instructions

DELAY PROGRAM

The PROGRAM DELAY button can be pressed to delay the start of the

washing program by 3, 6 or 9 hours. This function allows you to set the

dishwasher to work at your preferred time of day.

After selecting the delay, start the program (see relative section).

The appliance will prewash the dishes, after which the "program delay"

set previously will come into effect (the light corresponding to 3, 6 or 9

hours flashes).

reset or change the

delay

once the program has started:

• press the START/PAUSE button (3) for a few seconds, until the

PHASES/PROGRAM lights (7) come on;

• press the DELAY PROGRAM button several times “until the

program delay” returns to zero (all the lights indicating the delay go

out);

• press the START/PAUSE button (3) to start the new program.

To set the delay

once the program has started

, proceed as follows.

If the program you wish to carry out is the same as the one already

in progress:

• press the START/PAUSE button (4) for a few seconds, until the

PHASES/PROGRAM lights (7) come on;

• annul the program in progress (see relative section) and wait for the

cycle to come to an end;

• select the program again;

• select the delay required;

• press the START/PAUSE button (3) to start the new program.

If the program you wish to carry out is different from the one

already in progress:

• press the START/PAUSE button (3) for a few seconds, until the

PHASES/PROGRAM lights (7) come on;

• change the program;

• select the delay required;

• press the START/PAUSE button (3) to start the new program. The

dishwahser will pump out the water and restart with the delay set

and the new program.

Loading ...

Smeg PLA4513X Built-in Dishwasher