Loading ...
Loading ...
Loading ...
621
What to do in an emergency
12. If a tire inflation pressure of 1.8
bar (26 psi) is reached, turn the
On/Off switch to the "O"-position,
quickly unscrew the hose from
the tire. Unplug the cable from the
power outlet. Do not unscrew the
bottle. Stow the TireMobilityKit,
the bottle cap and the bottle hold-
er cap safely in the vehicle in an
easily accessible place, as it will
be needed again to check tire
pressure.
13. Drive immediately and cautiously
for about 3 km (2 miles) so that
the sealing compound can seal
the puncture. Do not exceed 80
km/h (50 mph). If while driving,
you experience any unusual
vibration, ride disturbance or
noise, reduce your speed and
drive with caution until you can
safely pull off of the side of the
road. Call for road side service or
towing.
F120202AUN
2nd Stage: Check tire pressure
14. Stop after driving for about 3 km
(2 miles) and check the pressure
of the punctured tire as follows:
a) Ensure that the On/Off switch
(8) of the compressor is in the
"O"-position.
b) Screw the hose onto the valve of
the punctured tire.
c) Plug the power cable into the
power outlet (12 volt socket).
d) Read the inflation pressure on
the gauge of the TireMobilityKit.
CAUTION
If the inflation pressure is below
1.3 bar (19 psi), do not continue
to drive. Call for road side serv-
ice or towing.
OUN066103L
Loading ...
Loading ...
Loading ...