Loading ...
Loading ...
Loading ...
21
9. Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the ten screws securing the inner door to the
outer door.
10. Reinstall door on dryer
Using a T25
®
screwdriver, remove the four screws on the
dryer. Insert the tabs on the hinge into the mounting slot and
slide down to engage the top tab. Secure in place with the
four T25
®
screws removed earlier.
Bottom
of door
1. Remove door from dryer
IMPORTANT: If the protective lm has not yet been removed
from the dryer, peel the lm from the dryer door before
proceeding.
Using a T25
®
screwdriver, remove the four screws securing
the door hinge to the dryer and lift up and out to remove
the door. Place the door on a soft towel or other non-scratch
surface. Reinstall the four screws in the holes.
Reverse door swing round-shaped door – double handle
2. Move door strike
Using a T25
®
screwdriver, remove the two screws securing
the door strike to the door frame of the dryer. Rotate the strike
180° and attach to the opposite side of dryer door frame,
as shown.
Loading ...
Loading ...
Loading ...