Loading ...
Loading ...
Loading ...
20
5. Reinstall hinge and latch on
opposite sides
Using a TORX
®
T25
®
screwdriver, reinstall the latch plate and
latch backing plate with the three TORX
®
screws removed
earlier and the hinge assembly with the ve screws on the
opposite sides from which they were removed.
6. Reinstall inner door assembly
Position the door with the inside of the door facing up.
Reinstall the 10 screws securing the inner door to the
outer door.
7. Reinstall door on dryer
Using a TORX
®
T25
®
screwdriver, remove the four screws on
the dryer. Insert the tabs on the hinge into the mounting slot
and slide down to engage the top tab. Secure in place with
the four TORX
®
T25
®
screws removed earlier.
Bottom
of door
Reverse door swing square-shaped door
1. Remove door from dryer
Using a TORX
®
T25
®
screwdriver, remove the four screws
securing the door hinge to the dryer and lift up and out to
remove the door. Place the door on a soft towel or other
non-scratch surface. Retain or set aside the four screws.
Loading ...
Loading ...
Loading ...