Loading ...
Loading ...
Loading ...
14
Lowes.com/harborbreeze
FINAL ASSEMBLY INSTRUCTIONS
1. Remove one of the two preassembled shoulder
screws (KK) in the hanger bracket (B). Loosen the
second shoulder screw (KK) without fully removing it.
Rotate the ceiling canopy (D) so the second shoulder
screw (KK) moves into the small opening of the
keyslot. Tighten the shoulder screw (KK).
Re-install the previously removed shoulder screw
(KK) to fully assemble the ceiling canopy (D) to the
hanger bracket (B). For easy installation, a short
Phillips screwdriver is recommended.
WARNING: To avoid possible fi re or shock,
make sure the electrical wires are completely inside
the canopy housing and not pinched between the
housing and the ceiling.
Hardware Used
KK
Shoulder Screw x 2
1
D
KK
2. Securely attach and tighten the canopy screw cover
(E) over the shoulder screws (KK) in the hanger
bracket (B), utilizing the keyslot twist-lock feature.
2
E
3. Remove one of the three preassembled adapter plate
screws (LL) inside the adapter plate at the bottom
of the motor (A). Slightly loosen the remaining two
adapter plate screws (LL). Assemble the light plate
assembly (G) to the adapter plate using the two
keyslots in the light plate assembly (G). Replace the
third adapter plate screw (LL) and secure all three.
Hardware Used
LL
Adapter Plate
Screw
x 3
3
A
G
LL
Loading ...
Loading ...
Loading ...