Loading ...
Loading ...
Loading ...
24
USA
ProCare
This programme is recommended
to be operated on each 1-2 months
for machine cleaning and necessary
hygiene. The programme should be
operated while the machine is empty.
In order to achieve an efficient result, it
is recommended to use together with
special machine cleaning agents.
C
Do not use this programme
to clean dishes. As
it operates in high
temperatures, it is harmful
for the dishes.
6.9 RINSE AID INDICATOR ( )
Please check the rinse aid indicator
on the display to see whether there is
adequate amount of rinse aid in the
dishwasher or not. You need to refill
the rinse aid reservoir with rinse aid
whenever rinse aid indicator appears on
the display of your machine.
6.10 END OF PROGRAMME
C
When the programme you
have selected comes to an
end, an audible warning
signal will warn you to turn
off your machine. This
audible signal will warn you
with certain intervals before
it turns off.
End of Programme indicator will light up
when the washing programme is over.
1. Open the door of the machine.
2. Press On/Off key to turn off your
machine.
3. Close the tap.
4. Unplug the machine from the socket.
C
For energy saving, the
machine is automatically
turned off following
the completion of the
programme or if the
programme is not started.
C
Leave your dishes in the
machine for about 15
minutes to allow them cool
down after they are washed.
Your dishes will dry in a
shorter time if you leave
the door of your machine
ajar during this period. This
process will increase the
drying effectiveness of your
machine.
6.11 WATER CUT-OFF
WARNING
If mains water is cut or water inlet
tap is turned off the machine cannot
take water in and E:02 icon will flash
on the programme indicator. As long
as the problem continues, washing
programme is paused and the water
inlet is checked regularly by the
machine; when the water is restored
E:02 icon will disappear after a while
and the washing programme resumes.
6.12 OVERFLOWING
WARNING
If the machine intakes too much
water or there is leakage at any of
the components then the machine
will detect this and E:01 icon will flash
on the Programme indicator. As long
as the overflowing continues safety
algorithm will be active and try to
discharge the water. If overflowing
stops and safety is assured, E:01
icon will disappear. If E:01 does not
disappear, there is a permanent fault.
In this case the authorised service
should be contacted.
Loading ...
Loading ...
Loading ...