Loading ...
Loading ...
Loading ...
Replacing the bulbs
1. Loosen the three fasteners, arrow 1, on the
bulb holder.
Remove the bulb holder from the tail lamp,
arrow 2.
2. Press the nonworking bulb gently into the
socket, turn counterclockwise and remove.
▷ Upper bulb: turn signal
▷ Lower bulb: brake light
3. Proceed in the reverse order to insert the
new bulb and attach the bulb holder. Make
sure that the bulb holder engages in all fas‐
teners.
Installing the tail lamp
1.
Connect the plug and mount the wiring on
the tail lamp, arrow 1.
2. Place the tail lamp with the tab, arrow 2, on
the mounting point of the body and push
onto both of the threaded bolt.
3. Press on the tail lights until flush and
tighten both of the nuts. Mount the cover.
Lights in the tailgate
Vehicles with halogen headlights
Follow general instructions, refer to page 206.
Reversing lamp: 21-watt bulb, P21WLL
Inner brake lamp: 21-watt bulb, H21WLL
Tail light: 5-watt bulb, P21WLL
Vehicles featuring LED headlights
Follow general instructions, refer to page 206.
Reversing lamp: 21-watt bulb, P21WLL
Inner brake lamp: 21-watt bulb, H21WLL
Accessing the lights
1.
Open the tailgate.
2. Pull out the cover at the recessed grip.
3. Remove the plug from the bulb holder.
Replacing reversing lamp and inner brake
lamp
1.
Loosen both fasteners, arrow 1, on the
bulb holder.
Remove the bulb holder from the tail lamp,
arrow 2.
Seite 212
Mobility Replacing components
212
Online Edition for Part no. 01 40 2 964 303 - VI/15
Loading ...
Loading ...
Loading ...