Loading ...
Loading ...
Loading ...
^
Open the blue filter frame fully and
remove the old filter. Hold by the
clean, unsoiled section to remove it.
^
Replace with a new dust
compartment filter.
^
Close the filter frame.
^
Fit the dustbag into the blue holder
as far as it will go.
^
Close the dust compartment lid
securely, making sure it clicks into
position. Take care not to trap the
dustbag when doing so.
When to replace the exhaust filter
Depending on model, your vacuum
cleaner will be fitted as standard with
one of the following exhaust filters
(dia. 9):
a AirClean
Replace this filter every time you start a
new packet of Miele dustbags.
An AirClean exhaust filter is supplied
with every packet of Miele dustbags.
b Active AirClean 50 (black)
c HEPA AirClean 50 (white)
Replace this filter if the exhaust filter
change indicator is completely red
(dia. 14).
This occurs after approx. 50 hours of
operation which is equivalent to about a
year of average use. The vacuum
cleaner can still be used. However, the
suction power will be reduced as will
the effectiveness of the filter if it is not
replaced in good time.
How to replace the AirClean filter
(dia. 35 + 36)
Do not use more than one exhaust
filter at a time.
^
Open the dust compartment lid.
^
Press the release catch on the filter
grille and open the grille until it clicks.
^
Grasp the used AirClean filter by one
of the clean, unsoiled sections and
take it out.
^
Replace it with a new AirClean filter.
If you wish to fit an Active AirClean
50 filter or a HEPA AirClean 50 filter
please see "Replacing one type of
exhaust filter with another".
^ Close the filter grille.
^ Close the dust compartment lid.
How to replace an Active AirClean 50
filter or a HEPA AirClean 50 filter
(dia. 37 + 38)
Do not use more than one exhaust
filter at a time.
^
Open the dust compartment lid.
^
Lift the exhaust filter and remove it.
^
Insert a new exhaust filter making it
sure it goes in properly, then push it
down into position.
^
Press the exhaust filter change
indicator ~ (dia. 12).
^
After approx. 10 - 15 seconds a thin
red stripe will appear in the left hand
side of the display (dia. 13).
en
44
Loading ...
Loading ...
Loading ...