Loading ...
Loading ...
Loading ...
3. Briefly press the SET ESC button to select the dis-
played submenu option and to open the relevant setup
menu.
4. Press the UP
or DOWN button (by single
presses) to select the new setting for this submenu
option.
5. Briefly press the SET ESC button to store the new
setting and go back to the previously selected sub-
menu option.
6. Press and hold the SET ESC button to return to the
main menu (short hold) or the main screen (longer
hold).
Change Engine Oil Indicator System
Change Engine Oil
Your vehicle is equipped with an engine oil change
indicator system. The “Change Engine Oil” message will
flash in the EVIC display for approximately 10 seconds
after a single chime has sounded to indicate the next
scheduled oil change interval. The engine oil change
indicator system is duty cycle based, which means the
engine oil change interval may fluctuate, dependent
upon your personal driving style.
Unless reset, this message will continue to display each
time you turn the ignition switch to the ON/RUN
position. To turn off the message temporarily, press and
release the SET ESC button. To reset the oil change
indicator system (after performing the scheduled main-
tenance), refer to the following procedure.
1. Turn the ignition switch to the ON position.(Do not
start the engine.)
2. Fully depress the accelerator pedal slowly, three times
within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
160 UNDERSTANDING YOUR INSTRUMENT PANEL
Loading ...
Loading ...
Loading ...