Loading ...
Loading ...
Loading ...
Drying Procedures
• Follow the guidelines below for preparing the load for drying.
• Readthe Dryer Operating Instructions for operating your specific model.
• Always read and follow fabric care labels and laundry product labels.
Follow fabric care label instructions.
.%i:i
Place small items in a mesh bag.
_To reduce the risk of fire, electrical shock, or serious injury to persons
or property, comply with the basicwarnings listed in ImportantSafetylnstructions
and those listed below.
Prepare items for drying.
Dry items of similar fabric, weight and construction in the same load.
• Separate dark items from light-colored items. Separate items that shed lint
from those that attract lint. If an item sheds lint, turn it inside out.
o
o
Besurebuckles, buttonsandtrim are heatproof and won't damagethe drum
finish. Closezippers, fasten hooks and Velcro®-Iike fasteners. Tiestringsand
sashesto prevent snagging and tangling.
If possible, turn pockets inside out for even drying.
Chockfor stains which may not have been removed in washing. Dryer heat
may permanently set some stains. Repeat stain removal process before
drying.
Placesmall items in a mesh bag to prevent tangling and for easy removal.
2. Check that lint screen is clean and in place.
3. Load the dryer.
The average load will fill the drum I/3to 1/2full. Items need room to tumble
freely for even drying and lesswrinkling. Do not overload dryer.
When drying large items, dry only 2 or 3 at atime. Fillout the load with small
and medium sized items.
Fordelicate or very small loads, add 2 lint-free towels for better drying, less
wrinkling, and to prevent grease stains caused byfabric softener sheets.
Do not overdry items. Overdrying can causewrinkling, shrinkage, harshness,
and a build-up of static electricity, which can produce more lint.
• If desired, add a dryer fabric softener sheet.
4. Close the dryer door and set dryer controls (some models).
SeeDryer Operating Instructions card for your specific model controls.
J
5. Select cycle and settings according to type of load, level of
dryness and/or options desired.
6. tart the dryer.
s
- _ Turn Start control clockwise to ON. Hold for 1-2 seconds and release.
To add or remove items when the dryer isrunning, open the door. Thedryer
will when the door is
always
stop
opened.
Filldryerdrum 1/3to 1/2full. Allow the drum to come to a complete stop before reaching inside.
7. When the cycle ends, remove items immediately and hang
or fold. If load is removed before the cycle ends, turn cycle selector to OFF.
Loading ...
Loading ...
Loading ...