Loading ...
Loading ...
Loading ...
Lights
8. Reinstall the socket into the light
assembly by turning it clockwise
until it locks.
9. Test the lights to make sure the
new bulb is working.
10.Reinstall the light assembly and
tighten the two screws and nut.
11.Reinstall the two covers.
Replacing a Rear License Bulb
1. Use a Phillips-head screwdriver to
remove the two screws holding
the license plate light lens.
2. Pull the bulb straight out of its
socket.
3. Push the new bulb straight into
the socket until it bottoms.
4. Turn on the parking lights and
check that the new bulb is
working.
5. Reinstall the two screws and
tighten them securely.
Maintenance
Main Menu
Table of Contents
Loading ...
Loading ...
Loading ...