Loading ...
Loading ...
ENGLISH
E-1
ENGLISH
Thank you for purchasing a SHARP air conditioner. Please read this manual carefully
before operating the product.
• PRECAUTIONS .................................... E-1
•
ADDITIONAL NOTES ON OPERATION ......
E-3
• TIPS ON SAVING ENERGY................. E-3
• PART NAMES....................................... E-4
• USING THE REMOTE CONTROL ....... E-6
• BASIC OPERATION ............................. E-8
•
ADJUSTING THE AIR FLOW DIRECTION ..
E-10
• FULL POWER OPERATION ................ E-11
CONTENTS
• ONE-HOUR OFF TIMER .............................E-11
•
TIPS ABOUT PLASMACLUSTER OPERATION..
E-12
• PLASMACLUSTER OPERATION ...............E-13
• TIMER OPERATION....................................E-14
• AUXILIARY MODE ......................................E-16
• MAINTENANCE...........................................E-16
• BEFORE CALLING FOR SERVICE ............E-18
WARNINGS FOR USE
1
Do not pull or deform the power supply cord. Pulling and misuse of the power supply cord
can result in damage to the unit and cause electrical shock.
2
Be careful not to expose your body directly to the outlet air for a long time. It may affect
your physical conditions.
3
When using the air conditioner for infants, children, elderly, bedridden, or disabled people
make sure the room temperature is suitable for those in the room.
4
Never insert objects into the unit. Inserting objects can result in injury due to the high
speed rotation of internal fans.
5
Ground the air conditioner without fail. Do not connect the grounding wire to gas pipe,
water pipe, lightning rod or telephone grounding wire. Incomplete grounding may cause
electric shock.
6
If anything is abnormal with the air conditioner (ex. a burning smell), stop the operation
immediately and turn the circuit breaker OFF.
7
The appliance shall be installed in accordance with national wiring regulations. Improper
cable connection can cause the power supply cord, plug and the electrical outlet to
overheat and cause fire.
8
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent
or a similarly qualified person in order to avoid a hazard. Use only the manufacture-
specified power cord for replacement.
WARNINGS FOR INSTALLATION / REMOVAL / REPAIR
•Do not attempt to install/remove/repair the unit by yourself. Incorrect work will cause electric
shock, water leak, fire etc. Consult your dealer or other qualified service personnel for the
installation/removal/repair of the unit.
This equipment complies with the requirements of Directives 89/336/EEC and 73/23/
EEC as amended by 93/68/EEC.
PRECAUTIONS
GS-XP07ER_Eng.p65 04.1.13, 10:16 AM3
Downloaded from www.ManualsFile.com manuals search engine
Loading ...
Loading ...
Loading ...