Loading ...
Loading ...
Loading ...
the tether strap to the anchorage and tighten the tether
strap. See section ⬙Installing Child Restraints Using
the Top Tether Anchorage⬙ for directions to attach a
tether anchor.
9. Test that the child restraint is installed tightly by
pulling back and forth on the child seat at the belt
path. It should not move more than 1 inch (25.4 mm)
in any direction.
Any seat belt system will loosen with time, so check the
belt occasionally, and pull it tight if necessary.
Installing Child Restraints Using the Top Tether
Anchorage
Always use the tether anchor when using the
seat belt to install a forward facing child re-
straint, up to the recommended weight limit of
the child restraint. There is a tether strap anchor located
behind the child tether access cover behind the passenger
seat to the anchor.
To attach a child restraint tether strap to the anchor:
1. Move the seat forward.
2. Move the seatback to its full forward position.
3. Remove the child tether access cover by prying either
side with a screwdriver or similar tool, as shown.
2
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 75
Loading ...
Loading ...
Loading ...