Loading ...
Loading ...
Loading ...
6
Note: Tap or hold either up(
^
) or down(
v
) button until the
desired temperature is seen on the display. This
temperature will be automatically maintained anywhere
between 60F (16C) and 90F (32C). If you want the display
to read the actual room temperature. See “To Operate on
Fan Only” section on Page 7.
Air Conditioner Features
(continued)
DO THIS:
PRESS TO RAISE
PRESS TO LOWER
YOU WILL SEE:
TO CHANGE
TEMPERATURE SETTING:
DO THIS:
PRESS
TO SELECT:
FASTER
SLOWER
YOU WILL SEE:TO ADJUST FAN SPEEDS:
DO THIS:
PRESS ON/OFF
PAD
YOU WILL SEE:TO TURN UNIT ON:
A 2 Digit Display is used to indicate the Fan Speed setting,
from 10 through 99. When the “SLOWER” button is
pressed the motor speed will slow down at various
intervals, to a minimum setting of 10. To speed the motor
up, press the “FASTER” button. The speed will increase at
various intervals to a maximum setting of 99.
NOTE: The following instruction represent the Touch Pad, the
same instructions can be used for the Remote Control.
Loading ...
Loading ...
Loading ...