Loading ...
Loading ...
Loading ...
24
FRY mode
This mode allows you to fry food in a large quantity of oil, up
to 2 l.
• After having turned on the plate with the ON/OFF button,
activate fry mode. The light above the button is switched
on and a beep sounds confirmation.
• The default fry temperature is 5 and the LCD screen will
display « F5 ».
• If you want to change setting, you have to press + or -
button, after each press the hob sounds confirmation.
• When the oil and pan temperature reaches the fry
temperature setting, the hob beeps 2 times
• For information : you will find below the approximate
temperatures for 2L of oil (Ingenio cookware)
• You can use the timer function for this mode (see chapter
“Timerfunction”). If you use thisfunction, the cooker will stop
automatically at the end of the programmed cooking time.
• If you want to turn off the cooker you need to do so
manually by pressing any button or on/off button.
BOIL mode
This mode allows you to boil between 0.4 litre and 2,5 litre of water
in a saucepan. (Do not use this mode for milk, as it may burn).
If the quantity of water is insufficient, the hotplate will not be able
to detect the boiling point and the boiling point may be reached
before the end of the programme.
• When you press boil mode, the light above the button is
switched on and a beep sounds confirmation. The LCD
shows a "chaser".
• Select the B1, B2 or B3 level depending on the quantity of
water to heat up; the default level is B1.
• To adjust the setting, press on the + or - button; each time
you press the button a beep will be emitted to confirm the
change.
F1 F2 F3 F4 F5 F6
125°C 140°C 155°C 170°C 185°C 200°C
B1 (small) 16cm pan B2 (medium) 18cm pan B3 (large) 20cm pan
~ 0,4 litres – 0,9 litres ~ 1 litre – 1,5 litres ~ 2 litres – 2,5 litres
EN
TE-PLAQUINDUCTION-NC00127885_Q7_final 12/9/14 11:37 Page 24
Loading ...
Loading ...
Loading ...