User Manual - Page 39

For 2014 BMW X6 XDRIVE35I.

Loading ...
Loading ...
Loading ...
Malfunction
The Comfort Access functions can be distur‐
bed by local radio waves, such as by a mobile
phone in the immediate vicinity of the remote
control or when a mobile phone is being
charged in the vehicle.
If this occurs, open or close the vehicle using
the buttons on the remote control or use the
integrated key in the door lock.
To start the engine afterward, insert the re‐
mote control into the ignition switch.
Warning lamps
The warning lamp in the instrument
cluster lights up when you attempt to
start the engine: the engine cannot
be started.
The remote control is not in the vehicle or has
a malfunction. Take the remote control with
you inside the vehicle or have it checked. If
necessary, insert another remote control into
the ignition switch.
The warning lamp in the instrument
cluster lights up while the engine is
running: the remote control is no lon‐
ger inside the vehicle.
After switching off the engine, the engine can
only be started again within approx. 10 sec‐
onds if no door has been opened.
The indicator lamp in the instrument
cluster comes on and a message ap‐
pears on the Control Display: replace
the remote control battery.
Replacing the battery
The remote control for Comfort Access con‐
tains a battery that will need to be replaced
from time to time.
1. Take the integrated key out of the remote
control, refer to page 30.
2. Remove the cover.
3. Insert a new battery of the same type with
the positive side facing upwards.
4. Press the cover closed.
Return used battery to a recycling collec‐
tion point or to your service center.
Alarm system
The concept
The vehicle alarm system responds to:
Opening of a door, the hood or the tailgate.
Movements in the vehicle: interior motion
sensor, refer to page 40.
Changes in the vehicle tilt, e.g., during at‐
tempts to steal a wheel or tow the car.
Interruptions in battery voltage.
The alarm system briefly indicates tampering:
By sounding an acoustic alarm.
By switching on the hazard warning sys‐
tem.
By flashing the high beams.
Seite 39
Opening and closing Controls
39
Online Edition for Part no. 01 40 2 910 876 - VII/13
Loading ...
Loading ...
Loading ...