User Manual - Page 2

For CEB515P2NSS.

Loading ...
Ca
1.5 Cu. Ft. Countertop
Convection/Microwave Oven
CEB515P4MWM / CEB515P3MDS
© 2018 GE Appliances PC90238 05/18
DIMENSIONS AND INSTALLATION INFORMATION
For answers to your Café™ product questions, visit our website at cafeappliances.com.
For a custom built-in appearance, these kits allow built-in installation
of the countertop microwave oven into a wall or cabinet alone and
are U.L. approved for installation over a GE single electric wall oven.
These kits should not be installed over a gas wall oven.
Note: 120V, 60-cycle, grounded power receptacle location optional
on back within cabinet opening.
Installation Information: This information is not intended to be used
for installing unit described. Before installing, consult installation
instructions packed with product/kit for current dimensional data.
*Height of product when installed with kit rail and bottom duct: 14-1/2"
CABINET OVERLAP REQUIREMENTS 30" 27"
A - Overlap of trim kit over top of cabinet 1" 1"
B - Overlap of trim kit over bottom of cabinet 1" 1"
C - Overlap of trim kit over sides of cabinet 3-5/16" 1-7/8"
NOTE:
Allow an additional inch
of clearance beyond trim
frame on all sides.
ACCESSORY TRIM KIT Z
JX9153 29-3/4"
JX9152 26-7/8"
19-1/8"
*14-1/2"
Allow 3"
clearance
*For ADA compliance, the microwave
must be installed no higher than 48".
A
C
23-1/4" ± 1/8"
Bracket
Trim
Kit
17-1/8" ± 1/8"
36" MIN.*
B
Z
23-1/2" MIN. receptacle
in cabinet 22" MIN.
receptacle outside
cabinet
EXTERIOR DIMENSIONS (IN INCHES)
Height 13"
Width 21-3/4"
Depth 16"
Depth including bumpout 20"
Depth from back of case to front legs 13"
Height
PRODUCT DIMENSIONS
Width
Depth
Depth including bumpout
Depth from back of case to front legs
12-3/16"
21-3/16"
16"
20"
13"
13"
21-3/4"
16"
13"
20"
CABINET OVERLAP REQUIREMENTS 30" 27"
A - Overlap of trim kit over top of cabinet 1" 1"
B - Overlap of trim kit over bottom of cabinet 1" 1"
C - Overlap of trim kit over sides of cabinet 3-5/16" 1-7/8"
NOTE: Allow an additional inch of clearance beyond trim kit frame on all sides.
OPTIONAL ACCESSORY TRIM KITS
(AVAILABLE AT ADDITIONAL COST)
ACCESSORY
TRIM KITS "Z"
MAX
HEIGHT
TRIM
KITS
30" Deluxe 29-3/4" 19-1/8" CX153P4MWM/CX153P3MDS
27" Deluxe 26-7/8" 19-1/8" CX152P4MWM/CX152P3MDS
Height
PRODUCT DIMENSIONS
Width
Depth
Depth including bumpout
Depth from back of case to front legs
12-3/16"
21-3/16"
16"
20"
13"
13"
21-3/4"
16"
13"
20"