Loading ...
Loading ...
Loading ...
To Enter Remote Start Mode
Push and release the REMOTE START
button on the
RKE Key Fob twice within five seconds. The vehicle
doors will lock, parking lights will flash, and the horn
will chirp twice (if programmed). Then, the engine
will start and the vehicle will remain in the Remote
Start mode for a 15-minute cycle.
NOTE:
• If an engine fault is present or fuel level is low, the
vehicle will start and then shut down in 10 seconds.
• The park lamps will turn on and remain on during
Remote Start mode.
• For security, power window and power sunroof op-
eration (if equipped) are disabled when the vehicle is
in the Remote Start mode.
• The engine can be started two consecutive times (two
15-minute cycles) with the RKE Key Fob. However, the
ignition must be cycled to the RUN position before
you can repeat the start sequence for a third cycle.
To Exit Remote Start Mode Without Driving The
Vehicle
Push and release the REMOTE START
button one
time or allow the engine to run for the entire 15-
minute cycle.
NOTE: To avoid unintentional shutdowns, the system
will disable with a one time push of the REMOTE START
button for two seconds after receiving a valid
Remote Start request.
To Exit Remote Start Mode And Drive The Vehicle
Before the end of 15-minute cycle, push and release the
UNLOCK
button on the RKE Key Fob to unlock the
doors and disarm the Vehicle Security Alarm (if
30 THINGS TO KNOW BEFORE STARTING YOUR VEHICLE
Loading ...
Loading ...
Loading ...