Loading ...
Loading ...
Loading ...
7
Reversing the Door Handle
Once the door opening has been reversed, it will be necessary to move the
door handle to the opposite side. To do this, follow these instructions:
1. Use a Phillips head screwdriver to remove the two screws holding the
handle to the left side of the door.
2. Remove the decorative caps from the opposite side of the door and plug
the holes from the original side with the decorative caps.
3. Align the handle with the screws removed in step # 1. Tighten the screws
until the handle is firmly secured against the side of the door.
OPERATING THE FREEZER
Turning the Freezer On and Off
The freezer turns on automatically when the power cord is plugged into a
120V AC, 60Hz electrical outlet. Similarly, it is turned off by disconnecting the
power cord.
Setting the Temperature Control
The internal temperature of this freezer is controlled by an EVK 201 digital
thermostat located below the door, on the right side of the grille panel.
If you find it necessary to change the temperature setting for your digital
thermostat-controlled appliance, please refer to the following instructions. The
front panel of the thermostat is illustrated here:
During normal operation, the display shows the internal cabinet temperature,
which is measured by a probe set onto the interior wall of the cabinet.
To see the SET POINT:
The temperature at which the freezer is set to operate is called the set point.
To see what this temperature is, push and immediately release the set key.
The snowflake-shaped LED will flash and the display will show the set point
value. Wait 15 seconds and the inside temperature will display again.
To change the SET POINT:
Push set and within 15 seconds, press the or key until the desired set
point is shown on the display. The new setting will be memorized after 15
seconds provided no other keys are pushed, or you can press the set key
immediately.
°C
°F
H
88.8
set
▼
▲
Loading ...
Loading ...
Loading ...