GE - General Electric AEC12AVH1 User Manual

Loading ...

49-7770 5

Controls

Cool Mode

8VHWKH&RROPRGHDWLow, Med, High or Auto Fan

SpeedIRUFRROLQJ8VHWKHTemperature Increase

ŸDecreaseźSDGVWRVHWWKHGHVLUHGWHPSHUDWXUH

between 64°F and 86°F in 1°F increments.

An electronic thermostat is used to maintain the room

temperature. The compressor will cycle on and off

to keep the room at the set level of comfort. Set the

thermostat at a lower number and the indoor air will

become cooler. Set the thermostat at a higher number

and the indoor air will become warmer.

NOTE: If the air conditioner is off and is then turned on

while set to a Cool setting or if turned from a fan setting

WRD&RROVHWWLQJLWPD\WDNHDSSUR[LPDWHO\PLQXWHVIRU

the compressor to start and cooling to begin.

Cooling Descriptions

For Normal Cooling—Select the Cool mode and High

or Med fan with a middle set temperature.

For Maximum Cooling—Select the Cool mode and

High fan with a lower set temperature.

For Quieter and Nighttime Cooling—Select the Cool

mode and Low fan with a middle set temperature.

Energy Saver Mode

This mode optimizes the cooling power of your air

conditioner, thereby saving you energy. Once the set

point temperature has been reached, the fan will cycle

off to save energy. The fan will cycle back on periodically

to insure all cooling capacity in the system is used. This

mode is the default mode for the unit. Each time the

unit is powered off, it will restart in Energy Saver mode

ON. The first time the unit is turned on, the settings will

be 70° and Low fan. You can adjust the fan speed and

temperature to your personal comfort.

Energy Saver ON—Helps minimize electricity use. It

is normal for the fan to cycle off and then back on in

this mode. This on/off cycle can repeat multiple times.

Because the fan will cycle off, you may notice a variation

in room temperature and humidity.

Energy Saver OFF—When this mode is not engaged,

the fan will run continuously, and in Cool mode the

compressor will cycle on and off to maintain room

temperature.

Fan Only Mode

8VHWKH)DQ2QO\0RGHDW/RZ0HGRU+LJKIDQVSHHG

to provide air circulation and filtering without cooling.

Since fan-only settings do not provide cooling, a Set

temperature cannot be entered. The room temperature

will appear in the display.

NOTE: Auto Fan Speed cannot be used when in the Fan

Only Mode.

Auto Fan Speed

Set to Auto fan speed for the fan speed to automatically

set to the speed needed to provide optimum comfort

settings with the set temperature.

If the room needs more cooling, the fan speed will

automatically increase. If the room needs less cooling,

the fan speed will automatically decrease.

NOTE: Auto Fan Speed cannot be used when in the Fan

Only Mode.

Power Outage Recovery Feature

In the case of a power outage or interruption, the unit will

automatically restart in the settings last used after the

power is restored.

Air Direction

8VHWKHOHYHUWRDGMXVWWKHDLUGLUHFWLRQOHIWDQGULJKW

only.

OPERATING INSTRUCTIONS

Loading ...

GE AEC12AVH1 - 115 Volt Electronic Room Air Conditioner

User Manual - Page 5