User Manual - Page 10

For CSCUE21PKR. Also, The document are for others Panasonic models: CS-E7PKR, CS-E9PKR, CS-E12PKR, CS-E15PKR, CS-E18PKR, CS-E21PKR, CS-E24PKR, CS-E28PKR, CU-E7PKR, CU-E9PKR, CU-E12PKR, CU-E15PKR, CU-E18PKR, CU-E21PKR, CU-E24PKR, CU-E28PKR

Loading ...
Loading ...
Loading ...
AAF
10
Cleaning instructions
To ensure optimal performance of the unit,
cleaning has to be carried out at regular
intervals. Dirty unit may cause malfunction
and you may see error code “H99”. Please
consult authorised dealer.
Switch off the power supply and unplug before
cleaning.
Do not touch the aluminium n, sharp parts may
cause injury.
Do not use benzine, thinner or scouring powder.
Use only soap (
pH 7) or neutral household
detergent.
Do not use water hotter than 40 °C.
Indoor unit
Wipe the unit gently with a soft,
dry cloth.
Human activity sensor
Do not hit or violently press or poke it with a sharp
object. This can lead to damage and malfunction.
Front panel
Wash gently and dry.
Remove the front panel
POWER
TIMER
AUTO COMFORT
NANOE-G
POWERFUL
QUIET
Raise
Pull out
1
2
Close it securely
For CS-E18PKR, CS-E21PKR, CS-E24PKR,
CS-E28PKR:
Press at center of the front panel
4
POWER
TIMER
AUTO COMFORT
NANOE-G
POWERFUL
QUIET
Insert at
both sides
1
Press both ends of
the front panel
3
Close down
2
nanoe-G Generator
Every 6 months
Clean with dry cotton bud.
Do not touch during operation.
Air lters
Every 2 weeks
• Wash/rinse the lters gently
with water to avoid damage to
the lter surface.
• Dry the lters thoroughly under shade, away
from re or direct sunlight.
Replace any damaged lters.
Remove air lter Attach air lter
Insert into the unit
For seasonal inspection after extended
non-use
Checking of remote control batteries.
No obstruction at air inlet and air outlet vents.
Use Auto OFF/ON button to select COOL/
HEAT operation. After 15 minutes of
operation, it is normal to have the following
temperature difference between air inlet and
air outlet vents:
COOL: 8 °C
HEAT: 14 °C
For extended non-use
Activate HEAT mode for 2~3 hours to remove
moisture left in the internal parts thoroughly to
prevent mould growth.
Turn off the power supply and unplug.
Remove the remote control batteries.
The fo
Mist em
Water
The roo
Indoor f
speed s
Air ow
Operat
i
Outdoo
TIMER
POWE
R
warm a
Indoor f
operatio
POWER
on.
Cracki
n
2 or mo
simulta
POWE
R
0.5 sec
Check
Operat
ef cien
Noisy
d
Remote
(Displa
The un
The un
remote
Tro
Indoor unit
NON
TURN
UNPLU
dealer
• Abno
• Wate
remot
• Wate
• Circu
• Powe
• Switc
prope
POWER
TIMER
AUTO
COMFORT
NANOE-G
POWERFUL
QUIET
Aluminium nFront panel
Air lters
Human activity
sensor
nanoe-G
Generator
F569361_EN.indd 10F569361_EN.indd 10 7/9/2013 8:48:48 AM7/9/2013 8:48:48 AM
Loading ...
Loading ...