Loading ...
Loading ...
Loading ...
11 Clean the water distribution disc with a moist cloth.
Be careful when you do this; make sure that the rubber sealing ring does
not get stuck under the edge of the water distribution disc. If it does, the
coffee machine will start leaking!
Flushing
If you have not used the coffee machine for three days, you have to ush it
with fresh water before you use it again.
Flush the machine in the following way:
1 Fill the water reservoir with cold water up to the MAX indication
and put it back into the machine.
2 Put the 1-cup pod holder q or the 2-cup pod holder qq in the
machine without pod(s).
3 Close the lid and lock the lever.
4 Put a bowl (with a capacity of at least 1.6 qt./1.5 litres) under the
coffee spout to collect the water.
5 Press on/off button 3 (1) and subsequently press the 1-cup button
q and the 2-cup button qq/w briey at the same time (2).
The machine lls itself with water from the water reservoir. While
this happens, water comes out of the spout. When the ushing cycle is
nished, the machine switches itself off. During the ushing cycle, the
machine produces more noise than during a regular brewing cycle
Never interrupt the ushing cycle halfway. If you do, the boiler will not ll
itself properly. Repeat step 5 if the cycle is interrupted.
15
Loading ...
Loading ...
Loading ...