Loading ...
Loading ...
Loading ...
4. Press the lamp retainer inward and turn it counter-clockwise to remove it. Note position of the lamp
positioning tab, then carefully pull the lamp out.
5. Install the new lamp. Make sure the filament is horizontal.
6. Reinstall the lamp retainer. Press the retainer inward and turn it clockwise about 1/4 turn.
7. Start the engine to make sure the lights come on. If the lights do not operate, see your POLARIS
dealer for service.
8. Reinstall the rubber cover, and reconnect the lights to the harness.
9. Reinstall the front cover (OUTLAW only).
INDICATOR LIGHT LAMP REPLACEMENT
1. Remove the handlebar cover or pod to access the lamps.
2. Remove the indicator wire connections from the harness.
3. Remove the nut from the back side of the indicator lamp.
4. Remove the lamp.
145
MAINTENANCE
Loading ...
Loading ...
Loading ...