Loading ...
Loading ...
Loading ...
(221,1)
北米Model "A1380BE-B" EDITED: 2019/ 12/ 16
models) or the shift lever to the reverse
position (MT models), the rear wiper will
switch to continuous operation. When you
move the select lever/shift lever from the
“R” (reverse) position to another position,
the rear wiper will return to intermittent
operation.
Reverse gear interlocked rear wiper:
Even if the rear wiper switch is in the off
“
” position, if the front windshield wiper is
operating continuously, the rear wiper will
operate intermittently when you move the
select lever/shift lever to the “R” (reverse)
position.
The factory setting (default setting) of the
reverse gear interlocked rear wiper is as
follows.
. U.S.-spec. models: Non-operational
. Other models: Operational
This setting can be changed by a SUBARU
dealer. Consult your SUBARU dealer for
details.
CAUTION
Do not attach anything that disturbs
the rear wiper operation on the rear
gate. Doing so may damage the rear
wiper when it operates.
! Washer
S03AM0202
To wash the rear window, turn the knob to
the “
” position. The washer fluid sprays
and the wiper operates until you release
the knob.
Mirrors
S03AP
Always check that the inside and outside
mirrors are properly adjusted before you
start driving.
& Inside mirror
S03AP01
1) Normal position
2) Anti-glare position
Push the tab on the mirror for normal use.
To reduce glare from the headlights of the
vehicle behind you, pull the tab to the anti-
glare position.
– CONTINUED –
Instruments and controls/Mirrors
3-77
3
Loading ...
Loading ...
Loading ...