FHWC3055LS User Manual

Loading ...

Electrical connections

DANGER

Danger of electric shock! All ﬁttings must be

installed by a competent person in accordance

with current wiring regulations and local

building regulations. If in doubt, consult a

qualiﬁed electrician.

IMPORTANT

Always switch off the electricity supply at

the mains during installation, cleaning and

maintenance. We recommend that the fuse is

withdrawn or circuit breaker switched off at the

distribution board while work is in progress.

Step 4:

• Loosenthe2shortscrewsfromthejunctionbox

(g.

)

fig.fig.

• Connect the incoming positive, neutral and

ground cables to the respective terminals. The

ground cable is already pre-assembled onto the

junctionboxtoprovidegrounding(g.

fig.fig.

L (live) = Black

(ground) =

Green

N (neutral) = White

• Mount the junction box onto the range hood

using2shortscrews(13)(g.

fig.

Step 5:

• Inserttheupperchimney(2)intothelowerchimney

(3)fromtoptobottom(g. ).

• Mountlowerchimney(2)ontherangehood(1).

• Fitthetab,whichisbendby90degrees,intothe

lower bracket notch and mount to the lower bracket

(4)(g. / ).

• Fixitwith2screws(12)(g. ).

fig.

• Pulltheupperchimney(2)totheupwardposition

to match the screw hole of the upper bracket.

Mount to the upper bracket (3) with 2 side screws

(10)(g.

• Insert2screws(8or11)inthetoplocation,but

donotfullyinsertthescrews(g. ). Mount the

range hood (1) to the wall and tighten the screws.

Insert and tighten the 2 remaining screws on the

bottomlocationoftherangehood(g. / ).

• Attachthecollar(5)totherangehood(1).Secure

with2shortscrews(8)(g. ).

Step 3:

• Mount upper and lower brackets (3, 4) on the

wall. Secure with the remaining 4 sets of long

screws (8). The notches of the lower bracket

shouldbefacinguptowardstheceiling(g.

)

• Attachtheexhaustduct.Intheexamplebelow

a round metal duct furnace pipe has been used.

The airtight connection of the exhaust duct

should then be improved with a duct tape. This

ensurestighttandthatnogreasevaporswill

escapefromtheduct(g.

)

Installing the hood

00-Elux FHWC3055LSA-Range-Hood-Book-01.indb 9 12/8/10 12:46 PM

Loading ...

User Manual - Page 9