Loading ...
Loading ...
Loading ...
If there is any residual heat
( / / ) on the
cooking zone you want to
use, an acoustic signal is
emitted and the function
does not start.
1. Touch to activate the hob.
2. Touch to activate the function.
A blinking appears for cooking zones
on which you can presently use the
function.
3. Touch the control bar of any
available cooking zone for which you
want to start the function (between
the heat setting 1-14).
The function starts.
If you do not choose any cooking zone
within 5 seconds the function does not
activate.
Once the function starts the
indicators above the
symbol come on one after
another until the water
reaches the boiling point.
When the function detects the boiling
point the hob emits an acoustic signal
and the heat level automatically changes
to 8.
If all cooking zones are
already in use or there is
some residual heat on all of
them, the hob emits a beep
sound, the indicators above
blink and the function
does not start.
To deactivate the function touch (the
function deactivates and the heat setting
goes down to 0) or touch the control bar
and adjust the heat setting manually.
The Pause function and
lifting of the pot deactivate
the SenseBoil® function.
5.5 Using the cooking zones
Place the cookware in the centre of the
selected zone. Induction cooking zones
adapt to the dimension of the bottom of
the cookware automatically.
5.6 Automatic Heat Up
Activate this function to get a desired
heat setting in a shorter time. When it is
on, the zone operates on the highest
setting in the beginning and then
continues to cook at the desired heating
setting.
To activate the function the
cooking zone must be cold.
To activate the function for a cooking
zone: touch ( comes on).
Immediately touch a desired heat
setting. After 3 seconds
comes on.
To deactivate the function: change the
heat setting.
5.7 PowerBoost
This function makes more power
available to the induction cooking zones.
The function can be activated for the
induction cooking zone only for a limited
period of time. After this time the
induction cooking zone automatically
sets back to the highest heat setting.
Refer to “Technical data”
chapter.
To activate the function for a cooking
zone: touch . comes on.
To deactivate the function: change the
heat setting.
5.8 Timer
Count Down Timer
You can use this function to set how long
the cooking zone should operate for a
single cooking session.
First set the heat setting for the cooking
zone then set the function.
To set the cooking zone: touch
again and again until the indicator of a
necessary cooking zone comes on.
To activate the function: touch of
the timer to set the time (00 - 99
minutes). When the indicator of the
cooking zone starts to flash slowly the
time counts down.
ENGLISH
11
Loading ...
Loading ...
Loading ...