Loading ...
Loading ...
Loading ...
14
INSTALLATION INSTRUCTIONS
5. Connecting water (Ice & Water and Automatic Ice models)
Contents of filter kit
1
1 x 4m long x Ø6mm (1/4”) tubing
2
1 x 200mm (8”) short Ø6mm (1/4”) tubing
3
1 x pressure reducing valve (PRV)
4
1 x double sided foam
5
2 x locking keys
6
1 x water filter cartridge and head
7
1 x tap connection — 15mm (1/2”) BSP
1 2 3 4 5 6 7
IMPORTANT!
●●
It is imperative the pressure reducing valve (PRV) is fitted prior to the filter. If the PRV
is not fitted to the connection line, the Ice & Water features may not function in some
circumstances.
●●
The water connection to your Ice & Water refrigerator must be installed by an
authorised plumber or Fisher & Paykel trained and supported service technician.
●●
The water connection instructions below are intended only for the professional installer.
●●
The new tubings supplied with the refrigerator are to be used, old tubings from old
water and ice connections should not be used.
●●
Replacement parts are available through Customer Care or online at
www.fisherpaykel.com (this service is available to selected markets only).
INSTALLATION PRECAUTIONS/WARNING
●●
DO NOT use with water that is microbiologically unsafe or of unknown quality without
adequate disinfection before or after the system.
●●
WARNING — connect to potable water supply only.
●●
DO NOT install on line pressure above 119psi (827kPa) or below 22psi (150kPa).
●●
DO NOT use on hot water supply 38°C max.
●●
DO NOT cut any length of tube shorter than 200mm.
●●
DO NOT install near electrical wires or water pipes that will be in the path of drilling
when selecting the location of filter system.
●●
DO NOT mount filter in such a position so that it will be struck by other items, such as
wastebaskets, etc.
●●
DO NOT install the filter or any water tubing in direct sunlight as prolonged exposure
to light can weaken plastic components.
●●
DO NOT install in a location that is susceptible to freezing temperatures as damage to
the housing could occur.
●●
DO NOT screw filter to the refrigerator.
●●
DO NOT install the filter or any water tubing in high temperature areas eg in a ceiling
cavity.
●●
AVOID contamination of pipes during installation.
●●
DO NOT use copper tubing. The plastic tubing supplied should always be used.
●●
DO NOT continuously dispense water for longer than 2minutes.
Loading ...
Loading ...
Loading ...