Loading ...
Loading ...
Loading ...
115
2. Instrument cluster
2
Instrument cluster
TUNDRA_OM_USA_OM0C025U_20MY
n Setting items
l “Vehicle Settings” and “Meter Settings” setting items are not selectable
during driving and cannot be operated.
Also, the settings screen is temporarily canceled in the following situations.
• When a warning message appears.
• When the vehicle begins to move.
l Settings for functions not equipped to the vehicle are not displayed.
l When a function is turned off, the related settings for that function are not
selectable.
n Pop-up display
In some situations, such as when a switch operation is performed, a pop-up
display will be temporarily displayed on the multi-information display.
n When disconnecting and reconnecting battery terminals
The drive information will be reset.
n Trip summary display
When the engine switch is turned off, each of the following will be displayed
on the multi-information display, and will clear after approximately 30 sec-
onds.
l Distance traveled
l Average fuel consumption
l Driving range
n Tire inflation pressure
l It may take a few minutes to display the tire inflation pressure after the
engine switch is turned to ON. It may also take a few minutes to display the
tire inflation pressure after inflation pressure has been adjusted.
l “---” may be displayed if the tire position information cannot be determined
due to unfavorable radio wave conditions.
l Tire inflation pressure changes with temperature. The displayed values may
also be different from the values measured using a tire pressure gauge.
n Liquid crystal display
Small spots or light spots may appear on the display. This phenomenon is
characteristic of liquid crystal displays, and there is no problem continuing to
use the display.
Loading ...
Loading ...
Loading ...