Loading ...
Loading ...
Loading ...
E295061
x2
1. Release the clamps that secure the air
filter cover to the housing.
2. Using a screwdriver, loosen the clamp
on the air filter housing cover.
3. Gently pull the boot back away from
the air filter housing cover.
4. Carefully lift the air filter housing cover.
5. Remove the air filter element from the
air filter housing.
6. Wipe any dirt or debris from the air filter
housing and cover to make sure no dirt
gets in the engine and that you have a
good seal.
7. Install a new air filter element. Be
careful not to crimp the filter element
edges between the air filter housing
and cover. This could cause filter
damage and allow unfiltered air to
enter the engine if it is not properly
seated.
8. Install the air filter housing cover.
9. Engage the clips to secure the air filter
housing cover to the air filter housing.
10. Reconnect the boot to the air filter
housing cover and torque to 3.69 lb.ft
(5 Nm).
332
Explorer (CTW) Canada/United States of America, enUSA, Edition date: 201902, First-Printing
Maintenance
Loading ...
Loading ...
Loading ...