Loading ...
Loading ...
Loading ...
Customer Service Troubleshooting Tips Installation Instructions Care and Cleaning Operating Instructions Safety Instructions
8
Using the surface units.
NOTE: A slight odor is normal when a new cooktop is used for the first time. It is caused by the heating of new parts
and insulating materials and will disappear in a short time.
About the radiant surface units…
The radiant cooktop features heating
units beneath a smooth glass surface.
The surface unit will cycle on and off to
maintain your selected control setting.
It is safe to place hot cookware from the
oven or surface on the glass surface when
the surface is cool.
Even after the surface units are turned
off, the glass cooktop retains enough heat
to continue cooking. To avoid over-
cooking, remove pans from the surface
units when the food is cooked. Avoid
placing anything on the surface unit until
it has cooled completely.
■
Water stains (mineral deposits) are removable
using the cleaning cream or full strength white
vinegar.
■
Use of window cleaner may leave an
iridescent film on the cooktop. The cleaning
cream will remove this discoloration.
■
Don’t store heavy items above the cooktop. If
they drop onto the cooktop, they can cause
damage.
■
Do not use the surface as a cutting board.
■
Do not slide cookware across the cooktop
because it can scratch the glass—the glass is
scratch resistant, not scratch proof.
,,
,,,,,,
,,,,,,,,,
,,,,,,,,,,,
,,,,,,,,,,
,,,,,,,,
,,,,
DRAGGING
,,,,,,
,,,,,,,,,
,,,,,,,,,,,
,,,,,,,,,,
,,,,,,,
,,,
SURFACE
COOKING
Never cook directly on the glass.
Always use cookware.
,,,,
,,,,,,,,,
,,,,,,,,,
,,,,,,,,,,
,,,,,,,,,
,,,,,,,
,,,
OFF CENTER
Always place the pan in the center of
the surface unit you are cooking on.
Temperature Limiter
Every radiant surface unit has a
temperature limiter.
The temperature limiter protects the
glass cooktop from getting too hot.
The temperature limiter may cycle the
units off for a time if:
■
The pan boils dry.
■
The pan bottom is not flat.
■
The pan is off center.
■
There is no pan on the unit.
Indicator Lights
A
HOT SURFACE
indicator light will glow
when any area above radiant element is
hot and will remain on until the surface is
cool enough to touch.
A surface unit
ON
indicator light will glow
when any surface unit is on.
NOTE: The surface unit ON light may glow
between the surface control settings of LO and
OFF, but there is no power to the surface units.
Loading ...
Loading ...
Loading ...