Loading ...
Loading ...
Loading ...
Accessing the daytime running lights, high
beams/headlamp flasher and parking lamps
Follow the general instructions on lamps and
bulbs, refer to page 183.
1. Open the hood, refer to page 177.
2. Turn the cap counterclockwise and remove.
Parking lamps
6-watt bulb, H6W
1.
Turn the bulb holder counterclockwise and
remove.
2. Press the bulb gently into the socket, turn
counterclockwise and remove.
3. To insert the bulb and bulb holder, proceed
in reverse order of removal. Make sure that
the bulb holder snaps into place.
4. Close the headlamp housing with the cap.
Make sure that the cap engages.
High beams/headlamp flasher
55-watt bulb, H7
1. Tilt the bulb down and then up to loosen it
from the holder and remove.
2. Pull the connector off the bulb.
3. Attach the connector to the new bulb.
4. First insert the bulb at the top with the strap,
arrow 1, and then press down firmly, arrow 2.
Make sure that the bulb snaps into place.
5. Close the headlamp housing with the cap.
Make sure that the cap engages.
Seite 186
Mobility Replacing components
186
Online Edition for Part no. 01 40 2 917 825 - II/13
Loading ...
Loading ...
Loading ...