User Manual Frigidaire FGID2479SD gallery 24'' built-in Dishwasher

It is normal for you to hear the water filling in your dishwasher along with water circulating and the motor running. If you hear a knocking or banging sound, check to ensure you do not have dish, pot, pan, or utensil causing the spray arm to circulate improperly.

Some of our models have a dial that can be adjusted for the rinse aid dosage while others require you to use your control pad. Since our models may vary, we recommend referencing your Owner’s Manual to determine what is applicable to your dishwasher.

If your dishwasher is not starting, we recommend you check the following:
- Make sure you have not inadvertently set DELAY START or CHILD LOCK.
- Make sure you have pressed START/CANCEL after selecting your cycles.
- Make sure you have closed door immediately to avoid having to reselect your cycle/options. If you added a forgotten item or interrupted the cycle, you may need to press START again for the cycle to resume once you close the door.
- Make sure the dishwasher door is properly closed.
- Make sure your water supply is turned on.

For stainless steel models, we recommend using Frigidaire ReadyClean Stainless Steel cleaner. It provides streak-free shine, protective coating repels dust and dirt, and gently cleans tough stains. Wipe with the grain to prevent scratching. Always follow the manufacturer’s instructions when using.

If your dishwasher is not draining properly, we recommend you check the following:
- Ensure that the knockout plug has been removed from inside the food waste disposer inlet.
- Make sure the drain hose is not kinkedEnsure the cycle is complete, not in pause status.
- Check that the glass trap/ filter is maintained and installed properly with no clogs.