Loading ...
Loading ...
Loading ...
E142551
3. Block the diagonally opposite wheel.
E211099
4. Remove the carpeted floor panel located
in the rear of the vehicle, then remove
the wing nut that secures the spare tire
by turning it counterclockwise.
5. Lift and remove the spare tire from the
trunk.
6. Remove the second wing nut that
secures the jack retention bracket by
turning it counterclockwise. Then remove
the jack kit from the vehicle.
7. Remove the jack, L-shaped bolt, and the
wrench from the felt bag. Fold down the
wrench socket to use to loosen the lug
nuts and to operate the jack.
8. Remove the wheel cover with the lug
wrench tip and loosen each wheel lug
nut one-half turn counterclockwise, but
do not remove them until the wheel is
raised off the ground.
E145908
9. The vehicle jacking points are shown
above, and are depicted on the warning
label on the jack.
340
MKT (TP4) , enUSA, Edition date: 201803, First-Printing
Wheels and Tires
Loading ...
Loading ...
Loading ...