Loading ...
Loading ...
Loading ...
9
CYCLE GUIDE — MANUAL CYCLES
Small loads and Quick Dry High 13 Wrinkle Shield
†
For small loads of 3-4 items.
sportswear Medium
Low
Extra Low
Air Only
Any load Timed Dry High 40 Wrinkle Shield
†
Use to dry items to a damp level for items that do
NOTE: Select Air Medium not require an entire drying cycle. Select a drying
Only to dry foam, Low temperature based on the type of fabrics in your
rubber, plastic, or Extra Low load. If you are unsure of the temperature to select
heat-sensitive Air Only for a load, select the lower setting rather than the
fabrics. higher setting.
Items to dry:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
Settings and options shown in bold are default settings for that cycle.
Not all features and cycles are available on all models.
Not all settings and options are available on each cycle.
CYCLE GUIDE — STEAM CYCLES
Settings and options shown in bold are default settings for that cycle.
Not all settings and options are available on each cycle.
Steam cycles are designed for use with dry loads to loosen wrinkles, reduce odors, and refresh fabrics.
Load Size Recommendations
For best results, follow the load size recommendations noted for
each cycle.
Small load: Fill the dryer drum with 3-4 items,
not more than 1/4 full.
Medium load: Fill the dryer drum up to about 1/2 full.
Large load: Fill the dryer drum up to about 3/4 full.
Do not overload. Items need to tumble freely.
Temperature
Cycle Signal
Dryness Level
Garment #
for auto cycles
for refresh cycles
Air Only
Extra Low
Medium
Low
High
Less Dry
Normal Dry
More Dry
6 - 7
8 - 9
2 - 3
1
4 - 5
Soft
O
Loud
Wrinkle
Shield
DoneWe tDampCool
Down
Steam Static
Reduce
Check Lint Screen Sensing
Estimated Time Remaining
Timed Dry Adjust
Adjusting drying time on Manual Cycles
When you select a Manual Cycle, the default
time appears in the display. Use the s and t
buttons to increase or decrease the time in 1
minute increments. Press and hold to change
the time in 5 minute increments.
The maximum dry time is 100 minutes.
†
Or Wrinkle Shield with Steam (on some models). Wrinkle Shield with Steam is available only with High and Medium Drying Temperature settings.
Selecting the Drying Temperature
A High heat setting may be used for drying heavyweight items
such as towels and work clothes.
A Low to Medium heat setting may be used for drying
medium-weight items such as sheets, blouses, dresses,
underwear, permanent press fabrics, and some knits.
Use a no heat (air dry) setting for foam, rubber, plastic, or heat-
sensitive fabrics.
Line dry bonded or laminated fabrics.
NOTE: If you have questions about drying temperatures for
various loads, refer to the care label directions.
Shirts, blouses, Quick Refresh Medium 12 (15)* Wrinkle Shield
†
Use to reduce odors and light wrinkles.
and slacks with Steam Static Reduce Select the number of garment to be refreshed
(on some models). Do not add dryer sheets.
Mixed Loads Enhanced High 22 Wrinkle Shield
†
Use to remove wrinkles, including from loads left in
Touch Up Medium Static Reduce the dryer too long. Dry time will automatically adjust
(on some when the load size is sensed. Cycle run time cannot
models) be manually adjusted, but Temperature is selectable.
Do not add dryer sheets
Items to
refresh:
Cycle:
Drying
Temperature:
Default
Time:
Available
Options:
Cycle Details:
* 12 minutes on 11-cycle models. 15 minutes on 8-cycle models.
†
Or Wrinkle Shield with Steam (on some models). Wrinkle Shield with Steam is available only with High and Medium Drying Temperature settings.
Loading ...
Loading ...
Loading ...