Loading ...
Loading ...
Loading ...
5. Removedoorhandlesealscrewfront.Movetooppositeside
ofrefrigeratordoorasshowninGraphic7.
6. Removedoorstop.Movetooppositesideofrefrigeratordoor
asshowninGraphic5.
7. Positionrefrigeratorhandleonoppositesideofthe
refrigeratordoorasshowninGraphic6-3.Drivetoptwo
screwsinhandlefirst.Alignlowerportionofhandleanddrive
bottomscrew.
8. Alignrefrigeratorhandlebottomtrim.ForStyle1,slidetrim
intoplaceandattachbottomscrew.SeeGraphic6-1.For
Style2,slidetrimintoplace.SeeGraphic6-2.
9. Tightenallscrews.Setasiderefrigeratordooruntilbottom
hingeisinstalledonproduct.
Style 2- Contour Doors
See complete Style 2 Graphics later in this section.
Round-Head DoorHandle DoorHinge
Handle Screw Screw Hole Plug Hole Plug
Cabinet
1. Remove s_6" hex-head hinge screws from handle side and
move them to opposite side. See Graphic 1-1.
2. Remove cabinet hinge hole plugs from the cabinet top and
move them to opposite side hinge holes as shown in
Graphic 1-2.
Doors
1. Remove door hinge hole plug from top of freezer door. Move
to opposite side as shown in Graphic 2.
2. Remove door stop from both the freezer and refrigerator
door. See Graphic 3.
NOTE: When reversing the door, the freezer handle becomes
the refrigerator door handle and the refrigerator door handle
becomes the freezer handle. See Door Handle Reversal
graphic.
3. Remove freezer handle assembly as shown. Keep all parts
together. See Graphic 4.
4. Remove refrigerator handle assembly as shown. Keep all
parts together. See Graphic 5.
5. Rotate and position handle from refrigerator door onto freezer
door and assemble as shown in Graphic 6.
6. Rotate and position handle from freezer door onto refrigerator
door and assemble as shown in Graphic 7.
7. Reinstall door stops to opposite side. See Graphic 8.
Replace Doors and Hinges
NOTE: Graphic may be reversed if door swing is reversed.
1. Replace the parts for the bottom hinge as shown. Tighten
screws. See Bottom Hinge graphic. Replace the refrigerator
door.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
to hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
door.
3. Assemble the parts for the top hinge as shown in Top Hinge
graphic. Do not tighten screws completely.
4. Line up the doors so that the bottom of the freezer door
aligns evenly with the top of the refrigerator door. Tighten all
screws.
Final Steps
Check all holes to make sure that hole plugs and screws are
in place. Reinstall top hinge cover. See Top Hinge graphic.
NOTE: On the left-hand side of the base grille there is a
removable tab which is a bottom hinge hole plug. Break off
the tab from the base grille and insert the bottom hinge hole
plug into the bottom hinge holes. See Base Grille graphic.
2. Replace the base grille. See Base Grille graphic.
3. Plug in refrigerator or reconnect power.
4. Reset the controls. See "Using the Control(s)."
5. Return all removable door parts to doors and food to
refrigerator.
Loading ...
Loading ...
Loading ...