Loading ...
Loading ...
User Guide
3
Installation
Installation
The following components should be present: RF Extender, power adapter,
4 dual IR emitters, mounting plate and 4 screws.
Before you install the RF Extender, you should decide which of the set-ups
described on p. 2 apply to your needs. It is recommended to read through the
entire User Guide.
Working Angle and Range of the IR blaster
Warning The IR signals sent out by the RF Extender always have to be able to reach the
receiving eyes of your devices. Make sure that the IR blaster (dark plastic window
on top of the RF Extender) is aimed at your devices.
To get optimal results, it is recommended to place the RF Extender horizontally
with the IR blaster facing up or down.
Figure 1 represents the RF Extender mounted up side down inside a closet.
Always maintain a minimum distance of 4 inches (10 cm) between the RF Extender
and your devices.
Figure 2 represents the RF Extender with the IR blaster facing up. The RF Extender
can be placed at a distance and higher than your devices. Make sure there are no
objects between the RF Extender and the receiving eyes of the devices.
Minimum distance:
4 inches (10 cm)
Maximum distance:
Approx. 16 feet (5 m)
Figure 1: IR blaster facing down Figure 2: IR blaster facing up
RFX6000 new 24-07-2002 14:04 Pagina 3
Loading ...
Loading ...
Loading ...