Loading ...
Loading ...
Loading ...
11
Style 1
Turning the Ice Maker On/Off:
The On/Off switch is located on the top right-hand side of the
freezer compartment.
n To turn on the ice maker, slide the control to the ON (left)
position.
n To manually turn off the ice maker, slide the control to the OFF
(right) position.
NOTE: Your ice maker has an automatic shutoff. The ice maker
sensors will automatically stop ice production, but the control will
remain in the ON (left) position.
Removing and Replacing Ice Storage Bin:
1. Hold the base of the storage bin with both hands and press
the release button to lift the storage bin up and out.
NOTE: It is not necessary to turn the ice maker control to the
OFF (right) position when removing the storage bin. The
sensor cover (“flipper door”) on the left wall of the freezer
stops the ice maker from producing ice if the door is open or
the storage bin is removed.
2. Replace the storage bin on the door and push down to make
sure it is securely in place.
Style 2
Turning the Ice Maker On/Off:
n To turn ON the ice maker, simply lower the wire shutoff arm.
n To manually turn off the ice maker, lift the wire shutoff arm to
the OFF (arm up) position and listen for the click. Ice can still
be dispensed, but no more can be made.
NOTE: Your ice maker has an automatic shutoff. As ice is made,
the ice cubes will fill the ice storage bin, and the ice cubes will
raise the wire shutoff arm to the OFF (arm up) position. Do not
force the wire shutoff arm up or down.
Removing and Replacing Ice Storage Bin:
1. Pull the covering panel up from the bottom and then slide it
back toward the rear.
2. Lift the wire shutoff arm so it clicks into the OFF (up) position.
3. Lift up the front of the storage bin and pull it out.
4. Replace the bin by pushing it in all the way or the dispenser
will not work.
5. To restart ice production, push the wire shutoff arm down to
the ON position. Make sure the door is closed tightly.
Water Filtration System
Water Filter Status Light (on some models)
The water filter status light will help you know when to change
your water filter.
n The light will change from green to yellow. This tells you that it
is almost time to change the filter.
n It is recommended that you replace the water filter when the
status light changes to red OR water flow to your water
dispenser or ice maker decreases noticeably.
The filter should be replaced at least every 6 months depending
on your water quality and usage.
After changing the water filter, reset the water filter status light.
Style 1: Press the light switch 5 times within 10 seconds. The
status light will change from red to green.
Style 2: Press and hold the water filter reset button until the status
light turns green. Your reset button may be located on the water
dispenser or on the control panel in the refrigerator compartment.
Non-Indicator Water Filter (on some models)
If your refrigerator does not have the water filter status light, you
should change the water filter cartridge at least every 6
months
depending on your water quality and usage. If the water flow to
the water dispenser or ice maker decreases noticeably before
6
months have passed, replace the water filter more often.
Using the Dispenser Without the Water Filter
You can run the dispenser without a water filter. Your water will not
be filtered.
1. Remove the water filter.
2. Slide the cap off the end of the filter and replace the cap in the
base grille.
IMPORTANT: Do not discard the cap. It is part of your
refrigerator. Keep the cap to use with the replacement filter.
Do not use with water that is microbiologically unsafe or
of unknown quality without adequate disinfection before
or after the system. Systems certified for cyst reduction
may be used on disinfected waters that may contain
filterable cysts.
Loading ...
Loading ...
Loading ...