Loading ...
Loading ...
Loading ...
15
Consumer SupportTroubleshooting Tips
Operating InstructionsSafety Instructions
Installation Instructions
Attach the Case to the Window Sash and Install the Foam Top Window Gasket
Drill a 1/8″ pilot hole and attach the top
mounting rail to the sash with a Type B screw.
Cut the foam top window gasket to the
window width.
Stuff the foam between the glass and the
window to prevent air and insects from getting
into the room.
C
B
A
11
Install the Air Conditioner in the Case
Slide the air conditioner into the case. Do not
push on the controls or the finned coils. Make
sure the air conditioner is firmly seated.
Reinstall the locking brackets and screws
removed earlier.
IMPORTANT!
Reconnect the ground wire
to the air conditioner.
Attach the front grille frame to the case by
inserting the tabs on the grille frame into
the slots on the front top of the case. Push
the grille frame in until it snaps into place
around the power cord on the right side.
Secure the front grille frame to the case by
replacing the screws removed earlier.
Install the filter. Hook the inlet grille in the
frame and close it. Connect power.
F
E
D
C
B
A
12
Guide the lever carefully
through the grille frame as
you push it in.
Screw
Ground wire
Type B screw
Top mounting rail
Loading ...
Loading ...
Loading ...