Loading ...
Loading ...
Loading ...
5
RINSE
You will hear sounds similar to the wash cycle as the
washer rinses and moves the load. You may hear
the motor turning on briey (short hum) to move the
basket while lling.
FINAL SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle
and spin speed.
CYCLE COMPLETE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
To allow for higher spin speeds, the
lid will lock and the Lid Locked light
will turn on. When this light is lit, the
lid is locked and cannot be opened.
When this light is blinking, the washer
is paused. When this light is off, the lid
can be opened.
After a cycle is started, water will
enter washer. Lid will be unlocked
during the Sensing/Fill process. If
you need to open the lid to add a
garment after this point, you must
press START/Pause and wait for the
lid to unlock. The lid will only unlock
after washer movement has stopped.
Depending on where in the cycle you try to pause, it
may take several seconds to several minutes for the lid
to unlock. Press START/Pause to resume the cycle.
Loading ...
Loading ...
Loading ...