MED8150EW User Manual

Loading ...

USING YOUR DRYER

1. Clean the lint screen

Clean the lint screen before each load. Pull the lint screen straight

up. Roll lint off the screen with your ﬁ ngers. Do not rinse or wash

screen to remove lint. Wet lint is hard to remove. Push the lint

screen ﬁ rmly back into place.

For additional cleaning information, see “Dryer Care.”

2. Load the dryer

Open the door by pulling on the handle. Place laundry in the dryer.

Add a dryer sheet to wet load if desired. Close the door.

IMPORTANT: Do not tightly pack the dryer. Items need to tumble

freely. Tightly packing can lead to poor drying performance and may

increase wrinkling and tangling.

WARNING: To reduce the risk of ﬁ re, electric shock, or injury to

persons, read the Important Safety Instructions before operating

this appliance.

3. Touch POWER/CANCEL

Touch POWER/CANCEL to turn on the dryer.

4. Select the desired cycle

Select the desired cycle for your load. See the “Cycle Guide”

for more information about each cycle. Not all cycles are on

all models. Press the Cycle Control Knob to activate the Extra

Power option, which provides an additional 10 minutes of cycle

time (including additional heat and tumbling, where applicable).

Appearance may vary.

AirDry

High

Less

Oﬀ

+Steam

Sensing

Cool Down

Check Vent

Wet

Damp

EXTRA POWER