Loading ...
Loading ...
Loading ...
11
TROUBLESHOOTING
Problem Possible Cause Solution
1
2
3
4
5
6
7
Red LED stays
after power on
Vacuum on but
can not collect
dirt and hair
The product is
moving backwards
after being started
LED indicators
ash in blue after
4hrs charging
The side brushes
crooked, not good
to sweep
The product
won’t start
The product circles
around only, cannot
go straight
1. Battery Low condition
2. Main body is picked up
1. The dust bin is full
2. The lter is not installed
correctly
1. The product is on dark
colored oor
2. Anti-drop sensor light
was covered
Power supply might been
cut o during charging
Being used for a long time
1. Battery is not installed
properly
2. Battery low
3. The robot is under
protection status
One of the wires of the
wheels might be loosened
1. Recharge the battery
2. Replace the robot on
the oor
1. Clean the dust bin
2. Re-install the lter
correctly
1. Put the robot on light
color oor.
2. Clean anti-drop sensor
light.
The robot can be operated
if the battery has been fully
charged for 4hrs
If it becomes crooked,
please scald it in hot water
to recover it to its original
shape
1. To install the battery
correctly
2. To have the battery fully
charged (turn o the
cleaner rst)
3. To re-set the robot
1. Open the wheel cover
and connect the loosen
wire properly
2. Send the robot to seller
for repairing
www.PyleUSA.com