Loading ...
Loading ...
Loading ...
Cleaning and maintenance
56
Removing racks/trays support frames
Removing the guide frames enables the
sides to be cleaned more easily. This
operation must be performed whenever the
automatic cleaning cycle is performed
(selected models only).
Removing the guide frames. Pull the guide
frames towards the inside of the oven so as
to remove it from groove A, then unhook it
from the attachment points B on the back.
When cleaning is complete, repeat the
above procedures to put the guide frames
back in.
4.9 Vapor Clean: assisted oven
cleaning (on some models only)
Preliminary operations
Before starting the Vapor Clean cycle:
• Completely remove all accessories from
inside the oven. The upper guard can be
left inside the oven.
• Pour approx. 40 cc of water onto the
floor of the oven. Make sure it does not
overflow out of the cavity.
Vapor Clean is an assisted
cleaning procedure which
facilitates the removal of dirt.
Thanks to this process, it is possible
to clean the inside of the oven very
easily. The dirt residues are
softened by the heat and water
vapour for easier removal
afterwards.
Improper use
Risk of damage to surfaces
• Remove food residue and drips from
previous cooking from the inside of the
oven.
• Carry out assisted oven cleaning
operations only when the oven is cold.
Loading ...
Loading ...
Loading ...