Loading ...
Loading ...
Loading ...
6
CYCLE STATUS LIGHTS INDICATOR
The Cycle Status Lights show the progress of a cycle.
At each stage of the process, you may notice sounds
or pauses that are different from traditional washers.
SENSING FILL
When the Start/Stop/Pause/Unlock Lid button is pressed,
the washer will fill with water and begin the wash cycle.
WASH
You will hear the agitator moving the load. The motor sounds
may change at different stages in the cycle.
The wash time is determined by the selected soil level.
RINSE
You will hear sounds similar to the wash cycle as the washer
rinses and moves the load. You may hear the motor turning
on briefly (short hum) to move the basket while filling.
SPIN
The washer spins the load at increasing speeds for
proper water removal, based on the selected cycle.
DONE
Once the cycle is complete, this light will come on.
Remove the load promptly for best results.
LID LOCKED
To allow for higher spin speeds, the lid
will lock and the Lid Locked light will turn
on. When this light is lit, the lid is locked
and cannot be opened. When this light is
off, the lid is unlocked and can be opened.
If you need to open the lid, press
START/STOP/PAUSE/UNLOCK LID.
The lid will unlock once the washer
movement has stopped. This may
take several minutes if the load was
spinning at high speed. Press START/
STOP/PAUSE/UNLOCK LID again to
resume the cycle.
EXTRA RINSE (on some models)
This option can be used to automatically add a second rinse to
most cycles.
NOTE: To open the lid during the rinse or extra rinse phase
after the first spin, you must first press START/STOP/PAUSE/
UNLOCK LID to unlock the lid.
PRESOAK (on some models)
This option can be used to automatically add a presoak
time to a wash cycle. Items will gently tumble through the
detergent and water for the selected time to help loosen tough
stains.
6
5
CYCLE GUIDE
For best fabric care, choose the cycle that best fits the load being washed. Not all cycles and options are available on all models.
Items to wash:
Cycle:
Temperature*:
Spin
Speed:
Cycle Details:
Sturdy fabrics,
colorfast items, towels,
jeans
Jeans Hot
Warm
Cool
Cold
Tap Cold
High Use this cycle for heavily soiled or sturdy items. This cycle uses
spray rinses only. Use this cycle for cleaning the interior of the
washer. See “Washer Care.”
Casual and mixed
loads, jeans, towels,
sturdy fabrics
Deep Water
Wash
Hot
Warm
Cool
Cold
Tap Cold
High Provides additional water and alternating wash action for
heavily soiled mixed loads. Water-level sensing process may
take longer for some items than for others because they will
absorb more water than other fabric types.
Cotton heavy soiled
bright or darkly colored
items, linens, casual,
and mixed loads
Power Wash Hot
Warm
Cool
Cold
Tap Cold
High Use this cycle to wash heavily soiled or sturdy items. The
washer may take additional time for the water level sensing
to occur due to these items absorbing more water than other
fabrics. This cycle complies with SASO 2885 (standard cotton
program 40°C using Cold temperature and standard cotton
program 60°C using Hot temperature).
Large items such as
sheets, sleeping bags,
small comforters,
jackets, small
washable rugs
Bulky/Sheets Hot
Warm
Cool
Cold
Tap Cold
Low Use this cycle to wash large items such as jackets and small
comforters. The washer will fill with enough water to wet down
the load before the wash portion of the cycle begins, and uses
a higher water level than other cycles.
*All rinses are cold.
7
Loading ...
Loading ...
Loading ...